View cart
Add products to your shopping cart

Image for Illustration purposes only. Actual product may vary


$271.00 Each


  • Typically ships in: 1 day
  • Weight: 1.0 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description


The P48 Controller accepts either a 0 to 10 VDC or a 0/4 to 20 mA DC signal, precisely displays the input process signal according to the programmable scaling points, and provides an accurate output control signal (time proportional or linear DC) to maintain the process at the desired control point. The controller’s comprehensive yet simple programming allows it to meet a wide variety of application requirements.

In the PID control mode the controller operates with on-demand auto-tune, which will establish the tuning constants. The PID tuning constants may be fine-tuned by the operator at any time and then locked out from further modification. The controller employs a unique overshoot suppression feature, which allows the quickest response without excessive overshoot. The unit can be transferred to operate in the manual mode, providing the operator with direct control of the output. The controller may also operate in the ON/OFF control mode with adjustable hysteresis. a second setpoint is available to allow quick selection of a different setpoint setting.

Dual 4-digit displays allow viewing of the process and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. On some models, the main control output and the alarm outputs are field replaceable.

Optional alarm(s) can be configured to activate according to a variety of actions (Absolute HI or LO, Deviation HI or LO, and Band IN or OUT) with adjustable hysteresis. A standby feature suppresses the alarm during power-up until the process stabilizes outside the alarm region. The second alarm can be configured as a secondary PID output (heat/cool applications).

The unit is constructed of a lightweight, high impact plastic case with a tinted front panel. The front panel meets NEMA 4X/IP65 specifications when properly installed. Multiple units can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the controller extremely reliable in industrial environments.

  • 50 mm x 50 mm
  • 18 to 36 VDC or 24 VAC Input Power
  • Dual 4 Digit Display, 0.4" (10 mm) Red and 0.3" (7.6 mm) Green
  • Relay, SSR Drive, Triac Outputs
  • Linear DC Outputs
ENC11000 ENC11 NEMA 4/IP65 1/16 DIN Enclosure
ENC11A00 ENC11A NEMA 4X/IP65 Enclosure for one 1/16 DIN Meter
ENC11B00 ENC11B NEMA 4X/IP65 Enclosure for two 1/16 DIN Meter
ENC30000 ENC3 Legend/Libra/C48/P48/P16/T16/T48/PXV Enclosure NEMA 1
BMK30000 BMK3 Base Mount Kit for Legend Libra, T16, P16, T48, P48, C48 and PXU
PMK3C000 PMK3C C48, T48, P16, T16 and PXU Mounting Panel
PMK60000 PMK6 Panel Mount Adapter Kit (1/8 DIN to 1/16 DIN)
PMK70000 PMK7 Panel Mount Adapter Kit (1/4 DIN to 1/16 DIN)
PMKCC100 PMKCC1 50 x 50 mm Panel Mount 3 Piece Kit for C48, T48 and PXU
PMKCC200 PMKCC2 72 x 72 mm Panel Mount 3 Piece Kit for C48, T48 and PXU
PMKCC300 PMKCC3 60 x 75 mm Panel Mount 2 Piece Kit for C48, T48 and PXU
PNL3F000 PNL3F Panel for 1/16 DIN Units
PNL3G000 PNL3G Panel for 1/16 DIN Units with Keylock
RLY50000 RLY5 Solid State Power Unit
RLY70000 RLY7 Three Phase DIN Rail Mount Solid State Relay
RBD48100 T48/P48 Output Board Main Control Relay
RBD48111 T48/P48/TLA Output Board, Main ControlDual Alarm Relay
RBD48200 T48/P48 Output Board, Main Control Logic Output
RBD48211 T48/P48 Output Board, Main Control LogicDual Alarm Relay
RLY60000 RLY6 25 A Single Phase DIN Rail Mount Solid State Relay
RLY6A000 RLY6A 40 A Single Phase DIN Rail Mount Solid State Relay

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning