MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
MRC 8315 Angular Contact Ball Bearings
MODEL 8315
Contact supplier for technical support on: 888 753 3477
$1,352.42 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Type
Angular Contact
Cage
Metal
Enclosure
Open
I.D.
2.953
Locking
None
O.D.
6.299
Item Details
| Manufacturer: | MRC Bearing Service |
|---|---|
| Weight: | 16. 127 lbs. |
| Product Name: | 8000 Series PumPac 40°/15° Angular Contact Ball Bearing Set |
| Description: | Single Row Angular Contact Bearing, 75 mm ID x 160 mm OD x 37 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° & 15° Contact Angle, Duplex (2) Set |
Specifications
| Inch/Metric | Metric Bore |
|---|---|
| Bore Type | Round Bore |
| I. D. | 75 mm |
| O. D. [Min] | |
| O. D. [Max] | |
| O. D. | 160 mm |
| Width [Min] | |
| Width [Max] | |
| Width | 37 mm |
| Enclosure | Open |
| Rows of Balls | Single |
| Material | Steel |
| O. D. Type | Straight |
| Bearing Type | Angular Contact |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | |
| Ambient Temperature Range [Max] | |
| Ball Material | Steel |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| Contact Angle | 40° & 15° |
| Guide Type | |
| Lubrication | |
| Outer Ring Width | 37 mm |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Seal Material | None |
| Seal Type | Unsealed |
| Seal Width | |
| Dynamic Load Rating | 32800 lbf |
| Static Load Rating [Max] | 33700 lbf |
| Ball Dia. | |
| Bearing Design | |
| Bore B | |
| Cage Material | Brass/Bronze |
| Collar No. | |
| Collar O. D. | |
| Collar Width | |
| Corner Radius [Min] | |
| Eccentric Collar Offset | |
| Fillet Radius | 1 mm |
| Flange O. D. [Max] | |
| Flange O. D. | |
| Flange Width [Max] | |
| Flange Width | |
| Flush Ground | |
| Housing Shoulder Diameter [Min] | |
| Housing Shoulder Diameter [Max] | |
| Housing Shoulder Diameter | |
| Industry Standard Part # | |
| Inner Ring O. D. | |
| Inner Ring Offset | |
| Inner Ring Width | 37 mm |
| Internal Design | |
| Limiting Speed | |
| Limiting Speed - Grease | 3600 rpm |
| Limiting Speed - Oil | 4800 rpm |
| Limiting Speed - Sealed | |
| Locking Device | No Locking Device |
| Lube Hole Center | |
| Lubricant | Oil Preservative |
| Misalignment Range | |
| No. in Set | Duplex Set |
| No. of Balls | |
| O. D. (B) | |
| Outer Ring | |
| Outer Ring Inner Diameter | |
| Outer Ring Size | |
| Peak Running Torque (mg-mm) | |
| Peak Starting Torque (mg-mm) | |
| Pre Lubricant | |
| Preload Amount | |
| Radial Internal Clearance | Normal |
| Radial Load Rating [Max] | |
| Radial Rigidity (lbf/µm) | |
| Reference Speed | |
| Seal O. D. | |
| Seal Protection Width | |
| Seating Washer | |
| Series | |
| Set Screw Offset | |
| Set Screw Size | |
| Shaft Shoulder Diameter [Min] | |
| Shaft Tolerance | |
| Snap Ring | No Snap Ring |
| Snap Ring O. D. | |
| Snap Ring Offset | |
| Snap Ring Thickness | |
| Special Features | |
| Stamping | |
| Static Thrust Load Rating [Max] | |
| Temperature Range [Min] | |
| Temperature Range [Max] | 450 °F |
| Use With | |
Product Information
The PumPac 8000 Series consists of one 40" (A) and one 15" (B) bearings.
SKU: 1133538
Motor bearings
Of all the bearings I have purchased in the last 45 years, these look to be top quality.
Read moreSKU: 1133536
Great bearings, great price!
I am rebuilding an old Delta/Rockwell drill press and was having trouble finding the correct replacement bearings at a reasonable price from my usual go-to online dealers; from those that even had them available. Shipping times where reasonable. Competitively priced at time of purchase. Stock status was available, had to use contact link to make sure they were available to ship. Would be very nice if real-time in-stock status could be available while hunting down need parts, but in the long run it's not that big of deal. The stock status email back following the inquire was quick with a quoted price and purchase link.
Read more
#1133505
Brand
MRC Bearing
Model
8315BB
| Brand | Toshiba |
| Model | 0024FCWA34A |
| Brand | WEG |
| Model | MT-037 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-241082 |
| Brand | Gates Rubber |
| Model | A51 |
| Brand | Dodge |
| Model | L150X5/8PB |
| Brand | NSI Industries |
| Model | ISE62 |
| Brand | Consolidated Bearings |
| Model | CRHSBC-22 |
| Brand | Boston Gear |
| Model | 56401 |
SKU: 1133538
Motor bearings
Of all the bearings I have purchased in the last 45 years, these look to be top quality.
Read moreSKU: 1133536
Great bearings, great price!
I am rebuilding an old Delta/Rockwell drill press and was having trouble finding the correct replacement bearings at a reasonable price from my usual go-to online dealers; from those that even had them available. Shipping times where reasonable. Competitively priced at time of purchase. Stock status was available, had to use contact link to make sure they were available to ship. Would be very nice if real-time in-stock status could be available while hunting down need parts, but in the long run it's not that big of deal. The stock status email back following the inquire was quick with a quoted price and purchase link.
Read more