We never sell your data to third parties
Dodge 023134 FC-E-208R flanged cartridge tapered roller bearing with 2-1/2" bore, set screw locking, non-expansion design in cast iron housing. Maximum speed 2,420 RPM with 54,000 lbf static load capacity. Suitable for applications requiring high radial and thrust load support with fixed shaft positioning.
MODEL FC-E-208R
Contact supplier for technical support on: +1-864-284-5700
$671.62 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing type
Tapered roller, tapered roller
Bolt circle
6.5000 in, 165.1 mm
Bolt Diameter
0.5000 in
Bore Diameter
2-1/2" (2.5000 inches)
Bore length
4.0000 in, 101.6 mm
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing type
Piloted flange
Housing Type
Piloted flange
I.D.
2-1/2 in
Insert material
Steel
Locking
Set screw attachment mechanism
Lubrication type
Grease
Max RPM
2420 RPM
Max Speed
2420 RPM
Performance
2, 420 RPM max speed, 54, 000 lbf static load rating
Rolling element
Tapered roller
Rolling Element
Tapered roller
Shaft attachment
Setscrew
Shaft diameter
2.5000 in
Static load capacity
54000 lbf, 240203.967 N
Specifications
- Catalog Number: 023134
- Engineering Number: FC-E-208R
- Housing Type: Flanged Cartridge
- Bore Size: 2-1/2 in
- Locking Type: Set Screw
- Bearing Type: Tapered Roller
- Weight: 17.0800 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#2256447
Brand
SealMaster
Model
RFPA 208
#5117751
Brand
Timken
Model
E-PF-TRB-2 1/2
| Brand | MRO Supply |
| Model | 6901-04-04-NWO-SS |
| Brand | Rollway |
| Model | 22328 VS C4 F80 W33 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/