We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 123913 P2B-SCAH-203 two-bolt pillow block bearing with 2-3/16" bore, set screw locking, cast iron housing, standard duty ball bearings, 211 series. Non-expansion design for fixed shaft positioning in general industrial applications. 2-3/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Air Handling applications
MODEL P2B-SCAH-203
Contact supplier for technical support on: +1-864-284-5700
$238.46 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Air handling
Ball bearing series
211 series
Base to center height
2.5000 in, 63.5 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
1.9400 in, 49.276 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
2 3/16 in
Bore length
2.2200 in, 56.388 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 3/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
4000 rpm
Max Speed
2500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
Single-lip seal with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.1875 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block (P2B)
- Bore Diameter: 2-3/16 inch (55.562 mm)
- Locking Type: 65-degree set screw for secure shaft attachment
- Housing Material: Cast iron construction for durability
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 211 series ball bearing
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Seal Type: Single-lip seal with flingers for contamination protection
- Maximum Speed: 2500 RPM
- Applications: General industrial machinery, conveyors, pumps, and equipment requiring fixed shaft support
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#123396
Brand
Dodge
Model
P2B-SCAH-203
#5904119
Brand
Dodge
Model
P2B-DLM-115-LL
#5904083
Brand
Dodge
Model
P2B-DLH-115-E-LL
#5782923
Brand
Dodge
Model
P2B-SCMAH-115-HT-DRY
| Brand | Hyde Tools |
| Model | 06888 |
| Brand | IKO Bearing |
| Model | PB18 |
| Brand | Formsprag |
| Model | CL41225-1GRRH |
| Brand | Chicago-Latrobe |
| Model | 56864 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/