We never sell your data to third parties
Dodge 123839 P2B-SC-211 two-bolt pillow block bearing with 2-11/16" bore, 65-degree set screw locking, cast iron housing, standard duty ball bearing, DualGuard seal, non-expansion design for general industrial applications. 2-11/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-211
Contact supplier for technical support on: +1-864-284-5700
$302.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
214 series
Base to center height
3.0000 in, 76.2 mm
Bearing type
Ball, ball
Bolt centerline range
7 1/2 inch - 8 1/2 inch
Bolt Diameter
0.7500 in
Bolt to bolt max
8.5000 in, 215.9 mm
Bolt to bolt min
7.5000 in, 190.5 mm
Bore
2 11/16 in
Bore length
2.5400 in, 64.516 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 11/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max Speed
2000 RPM
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
3 in
Shaft diameter
2.6875 in
Standoff housing
No
Static load capacity
9838 lbf, 43761.604 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-45,TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Size: 2-11/16" (68.263mm)
- Locking Type: 65-degree set screw for maximum holding power
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 214 series ball bearing insert
- Seal Type: DualGuard seals with flingers for contamination protection
- Configuration: Non-expansion (fixed) design for shaft positioning
- Applications: Ideal for conveyor systems, agricultural equipment, and general machinery requiring reliable shaft support
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123409
Brand
Dodge
Model
P2B-SC-211
#2247197
Brand
Dodge
Model
127331
#2247196
Brand
Dodge
Model
127330
#5002930
Brand
Dodge
Model
P2B-SCMED-208-NLS
| Brand | Hydraulic Technologies |
| Model | RJ-SP-2 |
| Brand | Lenox Tools |
| Model | 22755OSB156R |
| Brand | Precision Twist Drill |
| Model | 5998703 |
| Brand | E-Z Lok |
| Model | SK30810 |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/