We never sell your data to third parties
Dodge 124048 F4B-SC-008 4-bolt flange ball bearing with 1/8" bore, set screw locking, and standard duty rating. Cast iron housing with powder coated finish, DualGuard seals with flingers, and non-expansion configuration for fixed shaft positioning. Suitable for general purpose applications with a maximum speed of 7500 rpm.
MODEL F4B-SC-008
Contact supplier for technical support on: +1-864-284-5700
$77.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
203 series
Bearing Series
203 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
2.1300 in, 54.102 mm
Bolt to bolt min
2.1300 in, 54.102 mm
Bore
1/8 in
Bore Diameter
1/2"
Bore length
1.0000 in, 25.4 mm
Configuration
Non-expansion (fixed)
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Stainless steel
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
Housing Type
Four-bolt square flange mounting
I.D.
35 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Method
65-degree set screw
Lubrication type
Grease
Max RPM
7500 rpm
Max Speed
5000 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sealing
DualGuard seals
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
0.5000 in
Standoff housing
No
Static load capacity
1079 lbf, 4799.631 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
Specifications
- Catalog Number: 124048
- Engineering Number: F4B-SC-008
- Housing Type: 4-Bolt Flange
- Bore Size: 1/8" (12.7mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 1.1100 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#123364
Brand
Dodge
Model
P2B-SC-012-NL
#125623
Brand
Dodge
Model
P2B-DLB-012
#123453
Brand
Dodge
Model
F4B-SC-008
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#123535
Brand
Dodge
Model
P2B-SCAH-012
#123329
Brand
Dodge
Model
F4B-SC-115
#421683
Brand
SealMaster
Model
700458
#132845
Brand
Dodge
Model
F4B-VSC-115
#129353
Brand
Dodge
Model
F4B-SXR-200L
#2272052
Brand
Browning
Model
767929
#492405
Brand
Link-Belt
Model
10424023
#2272087
Brand
Browning
Model
767423
#125584
Brand
Dodge
Model
F4B-DL-115
| Brand | Balax |
| Model | 18562-01C |
| Brand | Gates Rubber |
| Model | TP630H150 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/