We never sell your data to third parties
Dodge 124100 F4B-SC-012 Four-Bolt Flange Ball Bearing with 3/4" bore, 65 degree set screw locking, cast iron housing, standard duty rating. Non-expansion (fixed) design with DualGuard seal system. 204 series insert rated 5000 RPM. 3/4" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-SC-012
Contact supplier for technical support on: +1-864-284-5700
$77.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
204 series
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
2.5000 in, 63.5 mm
Bolt to bolt min
2.5000 in, 63.5 mm
Bore
3/4 in
Bore length
1.2300 in, 31.242 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Stainless steel
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
1 1/5 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
7500 rpm
Max Speed
5000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
0.7500 in
Standoff housing
No
Static load capacity
1482 lbf, 6592.264 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-Bolt Flange (F4B) - Square bolt pattern surface mount
- Bore Diameter: 3/4 inch (19.05mm)
- Locking Type: Set Screw (SC) - 65 degree setscrew angle for maximum holding power
- Housing Material: Cast Iron - Class 25/30 for general purpose applications
- Duty Rating: Standard Duty - Normal load applications
- Expansion Type: Non-Expansion (Fixed) - Locates shaft axially
- Bearing Series: 204 Series Ball Bearing Insert
- Seal System: DualGuard single lip seal with rubberized flinger
- Maximum Speed: 5000 RPM
- Applications: General industrial machinery, conveyors, fans, pumps requiring surface mounting
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#789010
Brand
Dodge
Model
BF12C18T03592
#789016
Brand
Dodge
Model
BF12C18T20418
#789013
Brand
Dodge
Model
BF12C18T11434
#789008
Brand
Dodge
Model
BF12C18T02702
#789006
Brand
Dodge
Model
BF12C18T01088
#2272061
Brand
Browning
Model
767433
#421992
Brand
SealMaster
Model
700436
#326915
Brand
SKF Bearing
Model
FY 3/4 TF
#17880
Brand
AMI Bearings
Model
UCF204-12
#492112
Brand
Link-Belt
Model
10425589
#269723
Brand
NTN Bearing
Model
UCFU-3/4
| Brand | Bell & Gossett |
| Model | 185332LF |
| Brand | WILTON |
| Model | 42530 |
| Brand | Adam Equipment |
| Model | DCT 201 |
| Brand | |
| Model | 96904200 |
| Brand | Hydraulic Technologies |
| Model | 7307 |
| Brand | MRO Supply |
| Model | MRO-3MMGLV-10PK |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/