We never sell your data to third parties
Dodge 126194 F4B-SCM-207 four-bolt flange mounted ball bearing with 2-7/16" bore, 65 degree set screw locking, medium duty cast iron housing, DualGuard seals, 214 series, non-expansion design for heavy-duty industrial applications. 2-7/16" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-SCM-207
Contact supplier for technical support on: +1-864-284-5700
$302.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
214 series
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.8800 in, 149.352 mm
Bore
2 7/16 in
Bore Diameter
2-7/16 inch
Bore length
2.5400 in, 64.516 mm
Configuration
Non-expansion (fixed) bearing
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65 degree set screw
Lubrication type
Grease
Max RPM
3000 rpm
Max Speed
2000 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sealing
DualGuard single lip seal
Sensor ready
Adapter required
Series
214 series ball bearing insert
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
2.4375 in
Standoff housing
No
Static load capacity
9838 lbf, 43761.604 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing: Four-bolt flange mount, cast iron construction
- Bore Diameter: 2-7/16 inch (61.912mm)
- Locking Type: 65 degree set screw for maximum holding power
- Duty Rating: Medium duty for heavier loads than standard
- Series: 214 series ball bearing insert
- Sealing: DualGuard single lip seal with rubberized flinger
- Configuration: Non-expansion (fixed) bearing
- Weight: 13.9 lbs
- Applications: Heavy-duty industrial machinery, conveyors, pumps where square bolt pattern mounting is required
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123605
Brand
Dodge
Model
F4B-SCM-207
#131787
Brand
Dodge
Model
F4B-SCM-112
#119318
Brand
Dodge
Model
117164
#125256
Brand
Dodge
Model
F2B-SXV-200L
#128633
Brand
Dodge
Model
F2B-VSC-30M
#5830673
Brand
SKF Bearing
Model
F4BM 207-TF
#2364627
Brand
Link-Belt
Model
10410920
#269705
Brand
NTN Bearing
Model
UCFUX-2.7/16
| Brand | Edwards |
| Model | HAT8050 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/