We never sell your data to third parties
Dodge 126197 F4B-SCM-300 4-bolt flange bearing with 3" bore, set screw medium duty locking, cast iron housing, 216 series ball bearing insert, DualGuard seals with flingers, non-expansion design for fixed mounting applications. Powder coated finish for general purpose use, maximum 2500 rpm, relubrication enabled.
MODEL F4B-SCM-300
Contact supplier for technical support on: +1-864-284-5700
$433.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
216 series
Bearing Series
216 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.7500 in
Bolt to bolt max
6.0000 in, 152.4 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
3 in
Bore Diameter
3 in
Bore length
2.3800 in, 60.452 mm
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
Housing Type
Four-bolt flange mount (F4B)
I.D.
2 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65° set screw medium duty
Lubrication type
Grease
Max RPM
2500 RPM
Max Speed
1000 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Seal Type
DualGuard seals
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
3.0000 in
Standoff housing
No
Static Load
13, 102 lbf
Static load capacity
13102 lbf, 58280.6 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
Specifications
- Catalog Number: 126197
- Engineering Number: F4B-SCM-300
- Housing Type: 4-Bolt Flange
- Bore Size: 3" (76.2mm)
- Locking Type: Set Screw
- Duty Rating: Medium Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Medium Duty Ball
- Weight: 17.8200 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#791904
Brand
Dodge
Model
WSTU-SCMED-200
#133526
Brand
Dodge
Model
070557
#786454
Brand
Dodge
Model
072192
#123605
Brand
Dodge
Model
F4B-SCM-207
#128633
Brand
Dodge
Model
F2B-VSC-30M
#269704
Brand
NTN Bearing
Model
UCFUX-3
| Brand | Gates Rubber |
| Model | QD9/5V8.00 |
| Brand | Gates Rubber |
| Model | 4/5VX800 |
| Brand | Consolidated Bearings |
| Model | EW-1 3/8 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/