We never sell your data to third parties
Dodge 130335 F4B-SXV-112 four-bolt flange ball bearing featuring 1-3/4" bore, eccentric collar locking, intermediate duty rating, cast iron housing, DualGuard seal protection, and 209 series insert for general industrial applications. 1-3/4" bore 4-Bolt Flange Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL F4B-SXV-112
Contact supplier for technical support on: +1-864-284-5700
$97.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
209 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
4.1300 in, 104.902 mm
Bolt to bolt min
4.1300 in, 104.902 mm
Bore
1 3/4 in
Bore length
1.6900 in, 42.926 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
2 1/5 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
300 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.7500 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange mount for surface installation
- Bore Size: 1-3/4" (44.45mm) shaft diameter
- Locking Type: Quarter-turn eccentric collar for easy installation
- Duty Rating: Intermediate duty for moderate load applications
- Housing Material: Cast iron construction for durability
- Seal Protection: DualGuard seal system with flingers
- Bearing Series: 209 series ball bearing insert
- Expansion Type: Non-expansion (fixed) configuration
- Applications: General industrial machinery, conveyor systems, and equipment requiring surface mounting
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123535
Brand
Dodge
Model
P2B-SCAH-012
#5003229
Brand
Dodge
Model
P2B-DL-25M-LLS
#125251
Brand
Dodge
Model
F4B-SXV-112
#125286
Brand
Dodge
Model
P2B-SXVB-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#274755
Brand
NTN Bearing
Model
JELFU-1.3/4
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/