We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128814 FC-DL-110L piloted flange bearing with 1-5/8" bore (41.275mm), D-Lok concentric clamp collar locking, 209 series ball bearing insert, cast iron housing, standard duty rating, DualGuard seal, non-expansion configuration. 1-5/8" bore 4-Bolt Piloted Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL FC-DL-110L
Contact supplier for technical support on: +1-864-284-5700
$208.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
209 series
Bearing type
Ball, ball
Bolt circle
5.1300 in, 130.302 mm
Bolt Diameter
0.5000 in
Bolt to bolt max
5.1300 in, 130.302 mm
Bolt to bolt min
5.1300 in, 130.302 mm
Bore
1 5/8 in
Bore length
2.0100 in, 51.054 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
1 5/8 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
5000 rpm
Pilot depth
0.4400 in, 11.176 mm
Pilot diameter
4.2500 in, 107.95 mm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Clamp collar
Shaft diameter
1.6250 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: FC Piloted Flange (round piloted flange with bolt circle)
- Bore Diameter: 1-5/8" (41.275mm exact)
- Locking Mechanism: D-Lok concentric clamp collar - single Allen wrench tightening
- Bearing Series: 209 series ball bearing with wide inner ring
- Housing Material: Cast iron construction
- Duty Rating: Standard duty for normal industrial loads
- Seal Protection: DualGuard single lip seal with rubberized flinger
- Expansion Type: Non-expansion (fixed) - locks shaft axially
- Applications: Surface mounting with piloted alignment, no shaft marring, concentricity between bearing and shaft
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125286
Brand
Dodge
Model
P2B-SXVB-012
#125504
Brand
Dodge
Model
FC-DL-110L
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#125623
Brand
Dodge
Model
P2B-DLB-012
#5003229
Brand
Dodge
Model
P2B-DL-25M-LLS
#2259548
Brand
SealMaster
Model
705467
| Brand | Rollway |
| Model | 23026 CA C3 W33 |
| Brand | NK North America Inc. |
| Model | K0155.4A16X10 |
| Brand | Saginaw Control |
| Model | SCE-60EL2418SS6FS |
| Brand | Remke |
| Model | RSR-9309-E |
| Brand | Bondhus |
| Model | 38110 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/