We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128704 P2B-DLU-102 two-bolt pillow block bearing with 1-1/8" bore, concentric collar D-Lok locking, cast iron housing, standard duty rating, 206 series, DualGuard seals, non-expansion (fixed) design for precise shaft positioning applications. 1-1/8" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLU-102
Contact supplier for technical support on: +1-864-284-5700
$125.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
206 series
Base to center height
1.6900 in, 42.926 mm
Bearing type
Ball, ball
Bolt centerline range
4 7/16 inch-5 3/16 inch
Bolt Diameter
0.5000 in
Bolt to bolt max
5.0000 in, 127.0 mm
Bolt to bolt min
4.2500 in, 107.95 mm
Bore
1 1/8 in
Bore length
1.5200 in, 38.608 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/8 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
5500 rpm
Max Speed
5500 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
1 11/16 inch
Shaft diameter
1.1250 in
Standoff housing
No
Static load capacity
2538 lbf, 11289.586 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with 2-bolt base mount
- Bore Diameter: 1-1/8" (28.575mm) with 206 series insert
- Locking Type: D-Lok concentric collar - single Allen wrench cap screw, no shaft marring
- Housing Material: Cast iron construction for durability
- Duty Rating: Standard duty for general industrial applications
- Sealing: DualGuard seal with flingers for contamination protection
- Mounting: Non-expansion (fixed) design for shaft positioning and load bearing
- Applications: General purpose industrial equipment requiring precise concentric clamping
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2076600
Brand
Dodge
Model
268704
#125553
Brand
Dodge
Model
P2B-DLU-102
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#131371
Brand
Dodge
Model
P2B-DL-207
#421170
Brand
SealMaster
Model
NP-18T
| Brand | MRO Supply |
| Model | 2403-48-48 |
| Brand | MRO Supply |
| Model | 2701-04-04-SS |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/