We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128861 FC-DLM-115 piloted flange bearing with 1-15/16" bore, medium duty D-Lok concentric clamp collar locking, cast iron housing, 211 series ball bearing insert, DualGuard seal, non-expansion design for fixed positioning. 1-15/16" bore 4-Bolt Piloted Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL FC-DLM-115
Contact supplier for technical support on: +1-864-284-5700
$266.76 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
211 series
Bearing type
Ball, ball
Bolt circle
5.3800 in, 136.652 mm
Bolt Diameter
0.5000 in
Bolt to bolt max
5.3800 in, 136.652 mm
Bolt to bolt min
5.3800 in, 136.652 mm
Bore
1 15/16 in
Bore length
2.2500 in, 57.15 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
1 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max RPM
3500 RPM
Max Speed
3500 RPM
Pilot depth
0.6300 in, 16.002 mm
Pilot diameter
4.5000 in, 114.3 mm
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Clamp collar
Shaft diameter
1.9375 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Piloted flange (FC) with round piloted back and bolt circle mounting
- Bore Diameter: 1-15/16" (49.212mm) precision bore
- Locking Mechanism: D-Lok concentric clamp collar with single Allen wrench tightening
- Duty Rating: Medium duty (DLM) for heavier loads than normal duty
- Housing Material: Cast iron construction for durability
- Bearing Series: 211 series ball bearing insert
- Seal Protection: DualGuard seal system with rubberized flingers
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Applications: Surface mounting where concentricity between bearing and shaft is critical, no shaft marring
#5785510
Brand
Dodge
Model
P2B-DLH-115-E-HT-DRY
#132439
Brand
Dodge
Model
P2B-DLB-115
#5003649
Brand
Dodge
Model
P2B-DLAH-115-DRYS
#792177
Brand
Dodge
Model
128358
#623567
Brand
Dodge
Model
P2B-DLH-115-EHT
#2253889
Brand
SealMaster
Model
705633
| Brand | Dodge |
| Model | 134224 |
| Brand | Dodge |
| Model | 037915 |
| Brand | Cle-Line |
| Model | C00613 |
| Brand | Dodge |
| Model | 071443 |
| Brand | Dodge |
| Model | 071264 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/