We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 127510 TB-SCEZ-100-PCR tapped-base pillow block bearing with 1" bore (25.4mm) in 205 series. E-Z Kleen corrosion-resistant design with polymer housing, standard duty setscrew locking, and QuadGuard seals for washdown environments. 1" bore Tap Based Ball Bearing with Set Screw locking used in Washdown applications
MODEL TB-SCEZ-100-PCR
Contact supplier for technical support on: +1-864-284-5700
$177.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
205 series
Base to center height
1.3400 in, 34.036 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
2.0000 in, 50.8 mm
Bolt to bolt min
2.0000 in, 50.8 mm
Bore
1 in
Bore length
1.3400 in, 34.036 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Polymer
Housing option
Polymer
Housing type
Tapped-base pillow block
Insert material
Plated steel
Insert option
Corrosion Resistant
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.0000 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
Tap based
- Housing Type: Tapped-base pillow block with threaded mounting holes
- Bore Diameter: 1" (25.4mm) in 205 series
- Locking Type: 65-degree setscrew locking (SCEZ)
- Housing Material: Polymer (PBT thermoplastic) with corrosion-resistant insert (PCR)
- Corrosion Protection: E-Z Kleen for washdown environments
- Duty Rating: Standard duty ball bearing
- Sealing: QuadGuard triple lip seal system
- Configuration: Non-expansion (fixed) bearing
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#132917
Brand
Dodge
Model
F4B-SCEZ-100-PCR
#127096
Brand
Dodge
Model
TB-SCEZ-100-PCR
#130994
Brand
Dodge
Model
TB-SCEZ-103-PCR
#127029
Brand
Dodge
Model
F4B-SCEZ-103-PCR
#125286
Brand
Dodge
Model
P2B-SXVB-012
| Brand | Gates Rubber |
| Model | QD6C8.0 |
| Brand | MRO Supply |
| Model | 2120-06-06-B |
| Brand | MRO Supply |
| Model | D101840 |
| Brand | Balax |
| Model | 12184-010 |
| Brand | Cle-Line |
| Model | CHK01 |
| Brand | NK North America Inc. |
| Model | K0122.2103X35 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/