We never sell your data to third parties
Dodge 062879 P2B-SCEZ-200-SH Two-Bolt Pillow Block Bearing with 2" bore, E-Z Kleen set screw locking, stainless steel housing, QuadGuard seals, 210 series, standard duty for washdown environments and corrosion resistance applications. 2" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Washdown applications
MODEL P2B-SCEZ-200-SH
Contact supplier for technical support on: +1-864-284-5700
$206.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Washdown
Ball bearing series
210 series
Base to center height
2.2500 in, 57.15 mm
Bearing type
Ball, ball
Bolt centerline range
5.76 inch - 6.68 inch
Bolt Diameter
0.6250 in
Bolt to bolt max
6.6800 in, 169.672 mm
Bolt to bolt min
4.7600 in, 120.904 mm
Bore
2 in
Bore Diameter
2"
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing Material
Stainless steel
Housing option
Stainless steel
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
E-Z Kleen set screw with 65° angle
Lubrication type
Grease
Max Speed
3000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Seals
QuadGuard seals
Sensor ready
Adapter required
Series
210 series ball bearing
Shaft attachment
Setscrew
Shaft centerline height
2.25 in
Shaft diameter
2.0000 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
Yes
Take-up frame size
LD-30, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block
- Bore Diameter: 2" (50.8mm)
- Locking Type: E-Z Kleen set screw with 65° angle
- Housing Material: Stainless steel for corrosion resistance
- Duty Rating: Standard duty
- Series: 210 series ball bearing
- Seals: QuadGuard seals with flingers
- Expansion Type: Non-expansion (fixed) bearing
- Applications: Washdown environments, food processing, chemical exposure areas requiring corrosion protection
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123424
Brand
Dodge
Model
P2B-SCB-115-HT
#128803
Brand
Dodge
Model
P2B-VSC-50M
#5903695
Brand
Dodge
Model
P2B-SCMAH-111-HT-DRY
#2217871
Brand
Dodge
Model
P2B-SCM-112-HTS
#122535
Brand
Dodge
Model
LD-30X24-TUFR
| Brand | Allen Bradley |
| Model | 1756-CPR2 |
| Brand | Cleveland |
| Model | C41628 |
| Brand | Hubbell Wiring |
| Model | HBL420HI |
| Brand | Cutting Tool Technologies |
| Model | W809 |
| Brand | Precision Twist Drill |
| Model | 5996914 |
| Brand | Irwin Tools |
| Model | 3041014 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/