We never sell your data to third parties
Dodge 129233 P2B-GTM-308 two-bolt pillow block bearing with 3-1/2" bore, Grip Tight adapter mount, medium duty cast iron housing, and DualGuard seals with flingers. Non-expansion fixed bearing for shaft positioning in heavy-duty applications. Maximum speed 3800 rpm, relubrication enabled.
MODEL P2B-GTM-308
Contact supplier for technical support on: +1-864-284-5700
$1,049.66 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Base to center height
4.0000 in, 101.6 mm
Bearing type
Ball, ball
Bolt to bolt max
11.6200 in, 295.148 mm
Bolt to bolt min
10.3200 in, 262.128 mm
Bore
3 1/2 in
Bore Diameter
3-1/2" shaft capacity
Bore length
2.8000 in, 71.12 mm
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Finish
Uncoated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
3-1/2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Material
Steel
Max RPM
3800 rpm
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Seal Type
DualGuard single lip seal
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Shaft diameter
3.5000 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 129233
- Engineering Number: P2B-GTM-308
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 3-1/2" (88.9mm)
- Locking Type: Grip Tight
- Duty Rating: Medium Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Medium Duty Ball
- Weight: 29.7700 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/