We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 129766 FC-GTM-203 piloted flange bearing with 2-3/16" (55.562mm) bore, Grip Tight adapter mount, medium duty cast iron housing, DualGuard seals, non-expansion fixed design for industrial applications. 2-3/16" bore 4-Bolt Piloted Flange Ball Bearing with Grip Tight locking used in General Purpose applications
MODEL FC-GTM-203
Contact supplier for technical support on: +1-864-284-5700
$354.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Bearing type
Ball, ball
Bolt circle
2.1200 in, 53.848 mm
Bore
2 3/16 in
Bore length
2.1200 in, 53.848 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
2 3/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Max RPM
6000 rpm
Pilot depth
0.8800 in, 22.352 mm
Pilot diameter
5.0000 in, 127.0 mm
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Push-pull adapter
Shaft diameter
2.1875 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Piloted flange design for machined back-side mounting
- Bore Diameter: 2-3/16" (55.562mm) exact
- Locking Type: Grip Tight adapter mount - 360° shaft contact, no shaft marring
- Housing Material: Cast iron construction
- Duty Rating: Medium duty for heavier loads than standard
- Expansion Type: Non-expansion (fixed) design
- Sealing: DualGuard seals with flingers for standard protection
- Max Speed: 6000 RPM
- Applications: Industrial machinery requiring precision alignment and higher load capacity
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Edwards |
| Model | AC1024-S3 |
| Brand | Electra/Grove Gear |
| Model | EL8260067.00 |
| Brand | Jason Industrial |
| Model | D920-8M-170 |
| Brand | Jason Industrial |
| Model | 2400-8M-30 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/