We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 056855 P2B-SC-40M two-bolt pillow block bearing with 40mm bore, 65° set screw locking, cast iron housing, standard duty ball bearing, non-expansion (fixed), DualGuard seals, 208 series. For general industrial applications. 40mm bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-40M
Contact supplier for technical support on: +1-864-284-5700
$139.03 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
208 series
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.1800 in, 131.572 mm
Bore
40mm
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
40 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
40.0000 mm
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block (P2B)
- Bore Diameter: 40mm
- Locking Type: 65° set screw (SC)
- Housing Material: Cast iron (Class 25/30)
- Duty Rating: Standard duty
- Bearing Series: 208 series
- Expansion Type: Non-expansion (fixed)
- Seal Type: DualGuard seals with flingers
- Rolling Element: Standard duty ball bearing
- Maximum Speed: 3500 RPM
- Static Load Rating: 4475 lbf (19906 N)
- Applications: General industrial machinery, conveyor systems, agricultural equipment
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#792194
Brand
Dodge
Model
128367
#128799
Brand
Dodge
Model
P2B-VSCU-17M
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#128759
Brand
Dodge
Model
P2B-SC-40M
| Brand | Saginaw Control |
| Model | SCE-EP2005 |
| Brand | Greenfield Threading |
| Model | 386152 |
| Brand | SpillTech |
| Model | GPKB50H |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/