We never sell your data to third parties
Dodge 131818 P2B-SXR-200 two-bolt pillow block bearing with 2" bore, eccentric collar locking mechanism, cast iron housing, and DualGuard seals. Standard duty ball bearing rated for 3000 rpm applications. 2" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL P2B-SXR-200
Contact supplier for technical support on: +1-864-284-5700
$161.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
210 series
Base to center height
1.2500 in, 31.75 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
6.6800 in, 169.672 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
2 in
Bore length
2.5900 in, 65.786 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Material
Steel
Max RPM
4500 rpm
Max Speed
3000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
2.0000 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-30, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block design
- Bore Diameter: 2" (50.8mm)
- Locking Type: Eccentric collar quarter-turn locking
- Housing Material: Cast iron
- Duty Rating: Standard duty
- Bearing Series: 210 series
- Seal System: DualGuard seals with flingers
- Maximum Speed: 3000 rpm
- Static Load Rating: 5,213 lbf
- Weight: 6.05 lbs
- Application: General purpose industrial machinery, conveyors, and equipment requiring secure shaft positioning
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2217871
Brand
Dodge
Model
P2B-SCM-112-HTS
#2217983
Brand
Dodge
Model
P2B-SXRED-200S
#791362
Brand
Dodge
Model
P2B-SCMED-112
#122535
Brand
Dodge
Model
LD-30X24-TUFR
#129432
Brand
Dodge
Model
P2B-SXR-200
#269030
Brand
NTN Bearing
Model
UELP-2S
| Brand | JW Winco |
| Model | 41-80-M12-125-D3-S |
| Brand | Bondhus |
| Model | 3603 |
| Brand | System Plast |
| Model | VG-633 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/