We never sell your data to third parties
Dodge 129446 P2B-GTAH-09 two-bolt pillow block bearing with 9/16" bore, Grip Tight adapter mount locking, air handling duty rating, cast iron housing, non-expansion design, single-lip seal with flingers, 209 series ball bearing. 09 adapter size Pillow Block 2-Bolt Ball Bearing with Grip Tight locking used in Air Handling applications
MODEL P2B-GTAH-09
Contact supplier for technical support on: +1-864-284-5700
$195.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Air handling
Ball bearing series
209 series
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt to bolt max
6.1900 in, 157.226 mm
Bolt to bolt min
5.5000 in, 139.7 mm
Bore
09
Bore length
1.8500 in, 46.99 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Max Speed
5300 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
Single-lip seal with flingers
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 9/16" (14.2875mm) shaft capacity
- Locking Mechanism: Grip Tight adapter mount - 360° shaft contact, no shaft marring
- Application Rating: Air Handling duty for HVAC systems
- Bearing Series: 209 series ball bearing insert
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Seal Design: Single-lip seal with flingers for standard protection
- Max Speed: 5,300 RPM operating capability
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/