We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 124478 TB-SC-115 tapped base pillow block bearing with 1-15/16" bore, 65 degree set screw locking, cast iron housing, normal duty, 210 series. DualGuard seal standard. Threaded mounting holes for base attachment. 1-15/16" bore Tap Based Ball Bearing with Set Screw locking used in General Purpose applications
MODEL TB-SC-115
Contact supplier for technical support on: +1-864-284-5700
$174.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
210 series
Base to center height
2.2500 in, 57.15 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
4.0000 in, 101.6 mm
Bolt to bolt min
4.0000 in, 101.6 mm
Bore
1 15/16 in
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Tapped-base pillow block
I.D.
1 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
4500 rpm
Max Speed
3000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.9375 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
No
Type
Tap based
- Housing: Tapped base pillow block with threaded mounting holes
- Bore Diameter: 1-15/16" (49.212mm)
- Locking Type: 65 degree set screw for maximum holding power
- Housing Material: Cast iron construction
- Duty Rating: Normal duty for general purpose applications
- Series: 210 series ball bearing insert
- Seal: DualGuard single lip seal with rubberized flinger
- Max Speed: 3000 RPM
- Application: Ideal where bolts cannot pass through mounting base
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#131669
Brand
Dodge
Model
F2B-SC-014
#130862
Brand
Dodge
Model
TB-SC-115
#125188
Brand
Dodge
Model
TB-SC-014
#130861
Brand
Dodge
Model
TB-SC-104S
#125212
Brand
Dodge
Model
TB-SC-112
#2272528
Brand
Browning
Model
767936
#217417
Brand
IPTCI Bearing
Model
UCPA 210 31
#7133
Brand
AMI Bearings
Model
UCTB210-31C4HR5
#2258588
Brand
SealMaster
Model
724144
| Brand | MRO Supply |
| Model | D102757 |
| Brand | MRO Supply |
| Model | D203957 |
| Brand | Wiegmann |
| Model | NP1224 |
| Brand | MRO Supply |
| Model | D102014 |
| Brand | SolaHD |
| Model | SCP-MDC |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/