We never sell your data to third parties
Dodge 125857 P2B-SC-45M two-bolt pillow block ball bearing with 45mm bore, 65-degree set screw locking, cast iron housing, DualGuard seals with flingers, and 209 series insert for standard duty applications. Non-expansion design with relubrication capability. Powder coated finish for general purpose use.
MODEL P2B-SC-45M
Contact supplier for technical support on: +1-864-284-5700
$159.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
209 series
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
6.1900 in, 157.226 mm
Bolt to bolt min
5.5000 in, 139.7 mm
Bore
45mm
Bore Diameter
45mm (209 series)
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
45 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65-degree set screw
Lubrication type
Grease
Material
Steel
Max Speed
300 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sealing
DualGuard single lip seals
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
45.0000 mm
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 125857
- Engineering Number: P2B-SC-45M
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 45mm (45mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 4.7800 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#792196
Brand
Dodge
Model
128368
#125211
Brand
Dodge
Model
TB-SC-111
#780409
Brand
Dodge
Model
085857
#128789
Brand
Dodge
Model
P2B-SCM-65M
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/