We never sell your data to third parties
Dodge 131830 P2B-SXRB-012 two-bolt pillow block bearing with 3/4" bore, eccentric locking collar, and standard duty ball bearing insert. Cast iron housing with powder coated finish, DualGuard seals with flingers, and relubrication capability. 204 series insert, 7500 rpm maximum speed, 1-1/4" shaft centerline height, and 3-3/8" to 4-3/16" bolt centerline range. Non-expansion design for general purpose applications.
MODEL P2B-SXRB-012
Contact supplier for technical support on: +1-864-284-5700
$84.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
204 series
Base to center height
1.2500 in, 31.75 mm
Bearing Series
204 series ball bearing insert
Bearing type
Ball, ball
Bolt centerline range
3 3/8 inch - 4 3/16 inch
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1900 in, 106.426 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
3/4 in
Bore Diameter
3/4 inch shaft capacity
Bore length
1.5500 in, 39.37 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
3/4 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
5000 RPM operating capability
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sealing
DualGuard single lip seal
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft centerline height
1 1/4 in
Shaft diameter
0.7500 in
Standoff housing
No
Static load capacity
1482 lbf, 6592.264 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 131830
- Engineering Number: P2B-SXRB-012
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 3/4" (19.05mm)
- Locking Type: Eccentric Locking
- Duty Rating: Standard Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 1.4700 lb
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125539
Brand
Dodge
Model
P2B-DL-012
#792184
Brand
Dodge
Model
128350
#125623
Brand
Dodge
Model
P2B-DLB-012
#131275
Brand
Dodge
Model
P2B-SXRB-012
#123543
Brand
Dodge
Model
F2B-SC-203
#2271991
Brand
Browning
Model
767432
#422089
Brand
SealMaster
Model
700539
#2255115
Brand
SealMaster
Model
705477
#421709
Brand
SealMaster
Model
700561
#125560
Brand
Dodge
Model
F2B-DL-012
#2271992
Brand
Browning
Model
765616
#130669
Brand
Dodge
Model
F2B-SXR-012
| Brand | Crown |
| Model | SER3824YB |
| Brand | Dongan |
| Model | HC-0375-41 |
| Brand | NoTrax |
| Model | 130S0035BR |
| Brand | Crown |
| Model | SER3836YB |
| Brand | NoTrax |
| Model | 130S0035GN |
SKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/