We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 124413 F2B-SC-112 two-bolt flange mounted ball bearing with 1-3/4" bore, 65-degree set screw locking, cast iron housing, 209 series, DualGuard seals, standard duty rated for general industrial applications. 1-3/4" bore 2-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F2B-SC-112
Contact supplier for technical support on: +1-864-284-5700
$145.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
209 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bore
1 3/4 in
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt flange
I.D.
1 3/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
300 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
1.7500 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
2-bolt flange
- Housing Type: Two-Bolt Flange (F2B) - surface mount with diamond/oval bolt pattern
- Bore Diameter: 1-3/4" (44.45mm) with 209 series ring
- Locking Type: Set Screw (SC) - 65 degree setscrew for maximum holding power
- Housing Material: Cast iron for general purpose indoor applications
- Duty Rating: Standard duty for normal loads and operating conditions
- Expansion Type: Non-expansion (fixed) - positions shaft axially
- Sealing: DualGuard seals with flingers for contamination protection
- Applications: General industrial machinery, conveyors, pumps where surface mounting is required
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#131299
Brand
Dodge
Model
F2B-SC-112
#123495
Brand
Dodge
Model
F2B-SC-012
#125198
Brand
Dodge
Model
TB-SC-100
#125223
Brand
Dodge
Model
F2B-SXV-104S
#118278
Brand
Dodge
Model
228475
#2272016
Brand
Browning
Model
767691
#491770
Brand
Link-Belt
Model
10441043
#326961
Brand
SKF Bearing
Model
FYT 1.3/4 TF
#269797
Brand
NTN Bearing
Model
UCFLU-1.3/4
| Brand | Chicago-Latrobe |
| Model | 47488 |
| Brand | Cleveland |
| Model | C60231 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/