We never sell your data to third parties
Dodge 127624 P2B-DLEZ-25M-PCR two-bolt pillow block bearing with 25mm bore, D-Lok concentric clamp collar locking, E-Z Kleen polymer housing with corrosion resistant insert, QuadGuard seal, 205 series non-expansion 25mm bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in Washdown applications
MODEL P2B-DLEZ-25M-PCR
Contact supplier for technical support on: +1-864-284-5700
$196.45 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Washdown
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing Series
205 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.2000 in, 106.68 mm
Bolt to bolt min
3.9600 in, 100.584 mm
Bore
25mm
Bore Diameter
25mm (metric sizing)
Bore length
1.4400 in, 36.576 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Polymer
Housing Material
Polymer (PBT thermoplastic)
Housing option
Polymer
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
Insert material
Plated steel
Insert Material
Corrosion resistant
Insert option
Corrosion Resistant
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Seal Protection
QuadGuard seal system
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
25.0000 mm
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#126992
Brand
Dodge
Model
128992
#131391
Brand
Dodge
Model
P2B-DLEZ-25M-PCR
#125539
Brand
Dodge
Model
P2B-DL-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
| Brand | Pfannenberg |
| Model | 23351805000 |
| Brand | Royal Products |
| Model | 70589 |
| Brand | Cutler Hammer |
| Model | E26B9V4 |
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/