We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128786 F4B-DL-110L four-bolt flange mounted ball bearing with 1-5/8" bore and D-Lok concentric clamp collar. Cast iron housing, DualGuard seals, 209 series. Non-expansion (fixed) design for precise shaft positioning. 1-5/8" bore 4-Bolt Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL F4B-DL-110L
Contact supplier for technical support on: +1-864-284-5700
$195.63 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
209 series
Bearing type
Ball, ball
Bolt Diameter
0.5625 in
Bolt to bolt max
4.1300 in, 104.902 mm
Bolt to bolt min
4.1300 in, 104.902 mm
Bore
1 5/8 in
Bore length
2.0100 in, 51.054 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Polymer
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
35 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
5000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Clamp collar
Shaft diameter
1.6250 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt square flange mount for surface mounting applications
- Bore Diameter: 1-5/8" (41.275mm) with 209 series bearing ring
- Locking Type: D-Lok concentric clamp collar - single Allen wrench cap screw, no shaft marring
- Housing Material: Cast iron construction for general purpose indoor applications
- Duty Rating: Standard duty ball bearing for normal industrial loads
- Expansion Type: Non-expansion (fixed) - locks shaft axially for precise positioning
- Sealing: DualGuard single lip seal with rubberized flinger for standard contamination protection
- Applications: Industrial machinery, conveyors, pumps where concentric shaft attachment is critical
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123364
Brand
Dodge
Model
P2B-SC-012-NL
#125286
Brand
Dodge
Model
P2B-SXVB-012
#117141
Brand
Dodge
Model
022786
#123535
Brand
Dodge
Model
P2B-SCAH-012
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#2257487
Brand
SealMaster
Model
705433
| Brand | FAG Bearing |
| Model | LOCKNUT.SOCKET.KM8 |
| Brand | ABB |
| Model | G2MP1-60G01 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/