We never sell your data to third parties
Dodge 124217 F4B-SC-207 four-bolt flange bearing with 2-7/16" bore, 65° set screw locking, standard duty ball bearing insert, cast iron housing, DualGuard seals with flingers, non-expansion configuration, 212 series, maximum 3500 RPM, general purpose application.
MODEL F4B-SC-207
Contact supplier for technical support on: +1-864-284-5700
$231.59 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
212 series
Bearing Series
212 series standard duty ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
5.6300 in, 143.002 mm
Bolt to bolt min
5.6300 in, 143.002 mm
Bore
2 7/16 in
Bore Diameter
2-7/16" shaft size
Bore length
2.3100 in, 58.674 mm
Configuration
Non-expansion (fixed) bearing
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Stamped Steel
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Mechanism
65° set screw locking
Lubrication type
Grease
Max RPM
3500 RPM
Max Speed
2000 RPM
Maximum Speed
2000 RPM rating
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Seals
DualGuard single lip seals
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
2.4375 in
Standoff housing
No
Static load capacity
8100 lbf, 36030.595 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
Specifications
- Catalog Number: 124217
- Engineering Number: F4B-SC-207
- Housing Type: 4-Bolt Flange
- Bore Size: 2-7/16" (61.912mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 9.8300 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#128095
Brand
Dodge
Model
P2B-DLH-207-E
#2217661
Brand
Dodge
Model
P2B-SCBED-207S
#690727
Brand
Dodge
Model
P2B-SCED-207
#2247194
Brand
Dodge
Model
127328
#128116
Brand
Dodge
Model
P2B-SCH-207-E
#131709
Brand
Dodge
Model
P2B-SC-207
#129355
Brand
Dodge
Model
F4B-SXR-207
#2255757
Brand
SealMaster
Model
700463
#2272120
Brand
Browning
Model
767385
#2271796
Brand
Browning
Model
767342
#2272144
Brand
Browning
Model
767384
#2272046
Brand
Browning
Model
767383
#129440
Brand
Dodge
Model
P2B-SXRB-100
| Brand | Precision Twist Drill |
| Model | QC41G15/32 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/