We never sell your data to third parties
Dodge 126656 FC-DL-45M flanged cartridge bearing with 45mm bore. D-Lok concentric clamp collar locking, cast iron housing, standard duty ball bearing, DualGuard seal. Non-expansion fixed configuration for precise shaft positioning. 45mm bore 4-Bolt Piloted Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL FC-DL-45M
Contact supplier for technical support on: +1-864-284-5700
$229.32 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
209 series
Bearing type
Ball, ball
Bolt circle
5.1300 in, 130.302 mm
Bolt Diameter
0.5000 in
Bolt to bolt max
5.1300 in, 130.302 mm
Bolt to bolt min
5.1300 in, 130.302 mm
Bore
45mm
Bore length
2.0100 in, 51.054 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max Speed
5000 rpm
Pilot depth
0.4400 in, 11.176 mm
Pilot diameter
4.2500 in, 107.95 mm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
45.0000 mm
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: FC Flanged Cartridge - Round piloted flange with bolt circle mount
- Bore Size: 45mm (1.772")
- Locking Type: D-Lok concentric clamp collar - Single Allen wrench cap screw tightening
- Housing Material: Cast iron for standard indoor applications
- Bearing Series: 209 series ball bearing insert
- Duty Rating: Standard duty for normal load applications
- Seal Type: DualGuard single lip seal with rubberized flinger
- Expansion Type: Non-expansion (fixed) - Locks shaft position axially
- Max Speed: 5000 RPM rated speed
- Applications: Precision mounting applications requiring concentricity between bearing and shaft
SKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5903192
Brand
Dodge
Model
P2B-SXRB-45M
#791375
Brand
Dodge
Model
P2B-SCED-45M
#132407
Brand
Dodge
Model
P2B-DL-45M
#128787
Brand
Dodge
Model
P2B-SCM-45M
#134226
Brand
Dodge
Model
P2B-SXR-45M
| Brand | Dormer Pramet |
| Model | 5977888 |
| Brand | Timken Drives |
| Model | 27822 |
SKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/