We never sell your data to third parties
Dodge 128739 P2B-DLB-204L two-bolt pillow block bearing with 2-1/4" bore, concentric collar locking, cast iron housing, 212 series ball bearing, non-expansion (fixed) design. Standard duty rated to 3500 RPM with DualGuard seals. 2-1/4" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLB-204L
Contact supplier for technical support on: +1-864-284-5700
$321.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
212 series
Base to center height
2.6900 in, 68.326 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
7.9400 in, 201.676 mm
Bolt to bolt min
6.8800 in, 174.752 mm
Bore
2 1/4 in
Bore length
2.3800 in, 60.452 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
3500 RPM
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
2.2500 in
Standoff housing
No
Static load capacity
8100 lbf, 36030.595 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block bearing
- Bore Diameter: 2-1/4" (57.15mm)
- Locking Type: Concentric collar (DLB)
- Housing Material: Cast iron
- Bearing Series: 212 series ball bearing
- Duty Rating: Standard duty
- Expansion Type: Non-expansion (fixed)
- Maximum Speed: 3500 RPM
- Seal Type: DualGuard seals with flingers
- Static Load Rating: 8,100 lbf
- Weight: 14.6 lbs
- Applications: General purpose industrial equipment, conveyor systems, pumps, fans
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#132440
Brand
Dodge
Model
P2B-DLB-204L
#5904119
Brand
Dodge
Model
P2B-DLM-115-LL
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#130121
Brand
Dodge
Model
P2B-SC-207-HT
#2257438
Brand
SealMaster
Model
700593
#10490
Brand
AMI Bearings
Model
UCLP212-36
| Brand | Silverthin |
| Model | SK6-43PZ |
| Brand | Airmaster |
| Model | 24100 |
| Brand | SolaHD |
| Model | SCP30S12-DN |
| Brand | Dormer Pramet |
| Model | 5978714 |
| Brand | Bridgeport |
| Model | 590-DCI2 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/