We never sell your data to third parties
SKF YAR 220-2F is a 3-8/9 inch bore insert bearing with double contact seals. It features a spherical outer ring for self-alignment in Y-bearing housings. The bearing is pre-lubricated and suitable for conveyor systems, fans, and agricultural machinery.
MODEL YAR 220-2F
$678.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
For material handling applications
Basic Dynamic Load Rating
124 kN
Basic Static Load Rating
93 kN
Bore Diameter
100 mm
Bore Type
Cylindrical
Cage
Non-metallic
Coating
Without
Dimension Type
Metric
I.D.
3 8/9 in
Inner Diameter (mm)
100.000
Inner Ring Extension
On both sides
Inner Ring Retaining Feature
Set screws
Inner Ring Width
98.4 mm
Limiting Speed
1900 r/min
Lubricant
Grease
Material
Bearing steel
Material/Treatment
Bearing steel
O.D. (in)
7 1/9
Outer Diameter (mm)
180.000
Outer Ring Type
Spherical
Outer Ring Width
40 mm
Outside Diameter Type
Spherical
Pack Height
192 mm
Pack Length
184 mm
Pack Width
106 mm
Relubrication Feature
With
Rolling Elements
Balls
Rubber Seating Ring
Without
Seal Type
Contact
Sealing
Seal and flinger on both sides
Sealing Type
Contact, standard
Total Width
98.4 mm
Width (mm)
98.400
SKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MRO Supply |
| Model | 5406-SHP-24-SS |
SKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF