MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF-Bearing 7214 BEM1/VQ335
MODEL 7214 BEM1/VQ335
$487.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Internal Clearance
Not applicable
Basic Dynamic Load Rating
67.6 kN
Basic Static Load Rating
56 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
70 mm
Cage
Machined brass
Coating
Without
Contact Angle
40 °
Contact Type
Normal contact (two-point contact)
Limiting Speed
6300 r/min
Lubricant
None
Matched Arrangement
No
Number of Rows
1
O.D.
125 mm
Pack Height
136 mm
Pack Length
134 mm
Pack Width
29 mm
Reference Speed
6300 r/min
Relubrication Feature
Without
Ring Type
One-piece inner and outer rings
Sealing
Without
Tolerance Class
Normal
Width
24 mm
Single row angular contact ball bearing
These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
- High-speed capability
- Accommodate relatively high radial loads and large unilateral axial loads
| Brand | Dixon |
| Model | 6KF6 |
| Brand | Champion |
| Model | CM96-1-3/8X18X23 |
| Brand | Royal Products |
| Model | 24285 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-261007 |
| Brand | Dodge |
| Model | 17A40LR56 |
| Brand | Climax Metal |
| Model | PM-1420-8 |
| Brand | Hyde Tools |
| Model | 12040 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF