We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF TMHP 15/260 is a hydraulic pump for bearing mounting and dismounting. Weighing 156.5 lb, it delivers high-pressure oil for safe installation of large bearings. Suitable for industrial maintenance applications.
MODEL TMHP 15/260
$9,606.55 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Alternative Arm Lengths
With accessory alternative arms: 344 or 439 or 689 mm
Claw Height
30 mm
Claw Length
37 mm
Claw Width
12 mm
Coating
Chemical blackened
Colour
Black
Effective Arm Length
264 mm
Hexagon Size Spindle Head
22 mm
Material
Alloy engineering steels, hardened and tempered
Maximum Operating Pressure Hydraulic Cylinder
80 MPa
Number of Arms
3
Oil Capacity Hydraulic Cylinder
202 cm³
Oil Viscosity (maximum)
300 mm²/s
Pack Height
540 mm
Pack Length
1200 mm
Pack Width
800 mm
Piston Stroke Hydraulic Cylinder
100 mm
Pulling Force (max)
150 kN
Spindle Nose Piece
Yes, ⌀25 mm
Suitable for Bearing Dismounting from A Sleeve (adapter or Withdrawal Sleeve)
Yes
Suitable for Bearing Dismounting from A Tapered Seating (conical Shaft)
Yes
Suitable for Bearing Type(s)
All
Suitable for Workpiece Dismounting from A Blind Arrangement (housing with Shaft)
No
Suitable for Workpiece Dismounting from A Cylindrical Seating (straight Shaft)
Yes
Suitable for Workpiece Dismounting from A Housing
No
Total Arm Length
449 mm
Total Spindle Length
758 mm
Width of Grip External
195-386 mm
The SKF Hydraulically Assisted Heavy Duty Jaw Puller TMHP 15/260 is a powerful puller for dismounting large bearings and components. The self-centring puller, unique pantograph system and handling options make the puller safe and easy to use. The combination of a spindle and a hydraulic cylinder helps to mount the puller quickly. The SKF TMHP 15/260 is supplied in a complete ready-to-use set with hydraulic pump, oil and connections.
- High pulling forces can be applied easily and safely with self-centring puller
- Easy adjustable worklength through combination of spindle and hydraulic cylinder
- Unique pantograph system gives eXceptional grip and helps counteract misalignment during operation
- Simple operation with lifting handle and eye bolt
- Ready-to-use with SKF Hydraulic Pump TMJL 100, fleXible high pressure hose and hydraulic oil included
SKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MRO Supply |
| Model | 7032-20-16-BS |
| Brand | Bondhus |
| Model | 46406 |
| Brand | Electra/Grove Gear |
| Model | NH8520340.00 |
SKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF