MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF-Bearing 6002-2RSLTN9/HC5C3WT Single Row Deep Groove Ball Bearing, polyamide cage, C3 fit, 2 seals, ceramic balls, wide temp grease
MODEL 6002-2RSLTN9/HC5C3WT
Returnable:No
Basic Dynamic Load Rating
5.59 kN
Basic Static Load Rating
2.85 kN
Bearing Material
Hybrid (ceramic balls)
Bearing Outer Ring Locating Feature
None
Bore Diameter
15 mm
Bore Type
Cylindrical
Cage
Non-metallic
Coating
Without
Filling Slots
Without
Limiting Speed
26000 r/min
Lubricant
Grease
Matched Arrangement
No
Number of Rows
1
O.D.
32 mm
Pack Height
47 mm
Pack Length
45 mm
Pack Width
17 mm
Radial Internal Clearance
C3
Reference Speed
56000 r/min
Relubrication Feature
Without
Sealing
Seal on both sides
Sealing Type
Low-friction
Tolerance Class
Normal
Width
9 mm
Hybrid ceramic single row deep groove ball bearings with low-friction seals on both sides have rings made of bearing steel and rolling elements made of bearing grade silicon nitride, which make the bearings electrically insulating. The low-friction seals provide better sealing effectiveness than shields and non-contact seals, thus providing significantly prolonged bearing service life, yet they can still operate at the same speeds as shields. The ceramic rolling elements not only provide protection from electric current damage but also, when compared to same-sized bearings with steel rolling elements, provide enhanced bearing performance, extended bearing service life, higher speed capability, high wear-resistance, high bearing stiffness, reduced risk of smearing and false brinelling and less sensitivity to temperature gradients, making them suitable for use in dificult conditions and contaminated environments.
- Protected against electric current damage
- Especially suited for use in difficult conditions and contaminated environments
- Typical benefits of single row deep groove ball bearings
| Brand | Nexen |
| Model | 801677 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-764060 |
| Brand | Drillco |
| Model | 350N119 |
| Brand | MasterDrive |
| Model | P1-1.3/8 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-821148 |
| Brand | Te-Co |
| Model | 14034 |
| Brand | Airmaster |
| Model | 24231 |
| Brand | Bondhus |
| Model | 3705 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF