MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
$104.90 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
3.38 kN
Basic Static Load Rating
2.5 kN
Bearing Material
Stainless steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
25 mm
Bore Type
Cylindrical
Cage
Steel
Clearance
Normal
Coating
Without
Filling Slots
Without
I.D.
0.984 in
Limiting Speed
11000 r/min
Lubricant
Grease
Matched Arrangement
No
Number of Rows
1
O.D. (in)
1.457
Pack Height
80 mm
Pack Length
80 mm
Pack Width
16 mm
Radial Internal Clearance
CN
Relubrication Feature
Without
Sealing
Seal on both sides
Sealing Type
Contact
Tolerance Class
Normal
Width
7 mm
Stainless steel deep groove ball bearing with integral sealing
Stainless steel single row deep groove ball bearing with seals or shields on both sides, provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Greater chemical and corrosion resistance
- Integral sealing prolongs bearing service life
- Typical benefits of single row deep groove ball bearings
| Brand | Baldor |
| Model | 34FH4002A03SP |
| Brand | Cleveland |
| Model | C91835 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-260472 |
| Brand | Flowdrill |
| Model | 110450 |
| Brand | Schunk |
| Model | 425146 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-141111 |
| Brand | Martin Sprocket |
| Model | 3020 40MM |
| Brand | WEG |
| Model | TERMBLCK-W22-355M/L |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF