MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF Bearing TIH 220M/LV Maintenance Products
MODEL TIH 220M/LV
$16,960.28 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Support Arms
Yes, foldable
Coil Diameter
140 mm
Colour
Grey;Black
Cooling Fan
No
Demagnetisation after Heating (according SKF Norms)
< 2 A/cm
Dimensions (W X L X H)
290 x 750 x 440 mm
Error Guiding Codes
Yes
Heating performance example (bearing, weight, temperature, time)
23172 CC/W33, 220 kg, 110 °C, 20 min
Heating Temperature (max)
250 °C
Heating Temperature Control
0-250 °C
Heating Temperature Steps
1 °C
Heating Time Control
0.1-60 min
Heating Time Steps
0.1 min
Housing
Steel; Glass fibre filled polyamide
Main Yoke Type
Sliding yoke, 70 x 70 mm
Operating Area Height
255 mm
Operating Area Width
250 mm
Optional Yokes for Minimal Workpiece Bore Diameter
40 mm
Pack Height
720 mm
Pack Length
813 mm
Pack Width
613 mm
Power Consumption (max)
11.5 kVA
Power Setting
50%;100%
Remote Control Panel (wired)
Yes, with LED display
Temperature Measurement
Magnetic probe K-type
Thermal Overload Protection
Yes
Thermometer Mode
Yes
Time Mode
Yes
Voltage
200-230 V
Voltage Frequency
50-60 Hz
Workpiece Bore Diameter
60 mm
Workpiece Weight (max)
300 kg
Yoke Storage
Yes, internal
Large induction heater
The SKF TIH 220M is a large induction heater and is designed for the hot mounting of bearings. This versatile heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater has a convenient sliding yoke and is supplied with an additional smaller yoke. The TIH 220M can heat bearings with a minimum bore diameter of 60 mm and larger bearings with a maximum weight of 300 kg.
- Supplied with standard sliding yoke and one smaller yoke located in an integrated storage compartment
- Easy and safe to use with automatic temperature control or time controlled heating
- Automatic demagnetization reduces risk of bearing contamination
- Suitable for non-bearing applications for workpieces weighing up to 150 kg
- Automatic temperature hold function to keep the bearing hot after completion of the heating cycle
| Brand | MCR Safety |
| Model | P1D4630 |
| Brand | NTN Bearing |
| Model | UCT206D1 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-707296 |
| Brand | TB Woods |
| Model | 456H33.42 |
| Brand | Starrett |
| Model | 2700-800 |
| Brand | Falk |
| Model | 10013771 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF