MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF Bearing TIH 220M/US Maintenance Products
MODEL TIH 220M/US
$14,139.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Pack Height
720 mm
Pack Length
813 mm
Pack Width
613 mm
The SKF TIH 220M is a large induction heater and is designed for the hot mounting of bearings. This versatile heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater has a convenient sliding yoke and is supplied with an additional smaller yoke. The TIH 220M can heat bearings with a minimum bore diameter of 60 mm and larger bearings with a maximum weight of 300 kg.This heater is designed for the US market with additional peak voltage protection.
- Supplied with standard sliding yoke and one smaller yoke located in an integrated storage compartment
- Easy and safe to use with automatic temperature control or time controlled heating
- Automatic demagnetization reduces risk of bearing contamination
- Suitable for non-bearing applications for workpieces weighing up to 150 kg
- Automatic temperature hold function to keep the bearing hot after completion of the heating cycle
| Brand | MCR Safety |
| Model | 6062XXL |
| Brand | MCR Safety |
| Model | 300CX4 |
| Brand | Dodge |
| Model | P2B-SCAH-211 |
| Brand | Dodge |
| Model | FC-E-107R |
| Brand | Dodge |
| Model | P2B-DL-107 |
| Brand | Leeson |
| Model | M1145123.00 |
| Brand | SEW Eurodrive |
| Model | WF30 DRN80M4 90.8174918501.0001.22 |
| Brand | Airmaster |
| Model | 78975 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF