MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
NU317 BORE: 85 MILLIMETER OUTER DIAMETER: 180 WIDTH: 41 85mm Inner Diameter x 180mm Outer Diameter x 41mm Width Cylindrical Roller Bearing - Single Row with Steel Cage
MODEL NU317
Contact supplier for technical support on: 800-829-5787
$270.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel Alloy
Bore Type
Cylindrical
Cage Material
JIS SPCC Steel
Closure Type
Open
Contact Angle (Deg)
N/A
Dynamic Load Capacity (N)
224000
Grease Fill
N/A
Inner Diameter (mm)
85
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
CN/C0
ISO Precision Class
P0
Limiting Speed - Grease (RPM)
3400
Limiting Speed - Oil (RPM)
4000
Max Operating Temp.
120°C (248°F)
Number of Rows
1
Outer Diameter (mm)
180
Outer Ring Material
JIS SUJ2 Steel
Preload
N/A
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Series
NU Series
Snap Ring
No
Static Load Capacity (N)
247000
Universally (Flush) Ground
N/A
Width (mm)
4000
Cylindrical roller bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in the assembly/disassembly of components The NU Type bearings has shoulders on both sides of the outer ring and no shoulder on the inner ring. This allows the shaft to move axially for thermal expansion. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in pumps, compressors, gearboxes, transmissions, rolling mills, crushers and pulverizers. This bearing is often used in high speed applications. Separable components simplify mounting and removal. Long life. Heavy radial load capacity. Not suitable for thrust loads. Accommodates axial expansion and contraction. Effective when the bearing rings require interference. Low friction between rollers and flanges. No redial load capacity due to no flange of outer or inner ring. Used a non-locating side. Inner ring without rib. Outer ring with ribs on both sides([JIS B 1533).
| Brand | Fenner Industrial Motion |
| Model | 4934026 |
| Brand | Fenner Industrial Motion |
| Model | 4940053 |