We never sell your data to third parties
INA GAL45UK2RS Elges rod end
MODEL GAL45UK2RS
$671.01 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
1.772
O.D.
2.677
Specifications
| d | 45 mm | Tolerance: 0 / -0, 012 |
|---|---|---|
| d 2 | 102 mm | |
| l 2 | 214 mm |
| 0 - 0, 06 mm | Radial internal clearance | |
| B | 32 mm | Tolerance: 0 / -0, 12 |
|---|---|---|
| C 1 | 27 mm | |
| D | 68 mm | |
| d 1 | 50, 7 mm | |
| d 3 | M42X3 | |
| d K | 60 mm | |
| h | 163 mm | |
| l 1 | 94 mm | |
| l 7 | 52 mm | |
| r 1s min | 0, 6 mm | Chamfer dimension |
| α | 7 ° |
| m | 2, 6 kg | Mass |
|---|---|---|
| C r | 360000 N | Basic dynamic load rating, radial |
| C 0r | 259000 N | Basic static load rating, radialBasic load rating of housingIn rod ends with the sliding material ELGOGLIDE, the basic static load rating C 0r of the housing is less than the basic dynamic load rating C r of the bearing. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | SpillTech |
| Model | SPKU-55 |
| Brand | Regal Cutting Tools |
| Model | 073548MS |
| Brand | Bondhus |
| Model | 16270 |
| Brand | Siemens Controls |
| Model | 6ES7321-1CH00-0AA0 |
| Brand | Union Butterfield |
| Model | 1545A3/8 |
