We never sell your data to third parties
$7,897.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
3.937
O.D.
7.283
Specifications
| d | 100 mm | Sizes d > 1030 mm available by agreement |
|---|---|---|
| D | 185 mm | |
| H | 38 mm |
| 16 | Number of fixing holes in inner ring Attention!For fixing holes in the adjacent construction. Note the pitch of the bearing holes. | |
| 15 | Number of fixing holes in outer ring Attention!For fixing holes in the adjacent construction. Note the pitch of the bearing holes. | |
| 2 | Number of retaining screws | |
| 3 | Number of extraction threads | |
| 1) | Retaining screws | |
| 2) | Screw counter bores in the L-section ring open to the bearing bore, see Figure 2. )Bearing inside diameter unsupported in area x. | |
| a | 5,4 mm | Fixing holes in inner ring |
| C | 12 mm | |
| D 1 max | 161 mm | |
| d 1 | 5,6 mm | Fixing holes in inner ring |
| d 2 | 10 mm | Fixing holes in inner ring |
| d 3 | 5,6 mm | Fixing holes in outer ring |
| G | M5 | Extraction thread |
| H 1 | 25 mm | |
| H 2 | 13 mm | |
| J | 112 mm | Fixing holes in inner ring |
| J 1 | 170 mm | Fixing holes in outer ring |
| t | 18 X 20° | Pitch t Including retaining screws and extraction threads Quantity X t |
| m | 4,1 kg | Mass |
|---|---|---|
| M A | 8,5 Nm | Screw tightening torque Tightening torque for screws to DIN 912, grade 10. 9. |
| C a | 73000 N | Basic dynamic load rating, axial |
| C 0a | 370000 N | Basic static load rating, axial |
| C r | 52000 N | Basic dynamic load rating, radial |
| C 0r | 108000 N | Basic static load rating, radial |
| n G | 280 1/min | Limiting speed For high operating durations or continuous operation, please contact us. |
| M R | 3 Nm | Bearing frictional torque |
| c aL | 2000 N/µm | Axial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| c Lr | 2000 N/µm | Radial rigidity of bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| c kL | 5000 Nm/mrad | Tilting rigidity of the bearing position Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| c aL | 6800 N/µm | Axial rigidity of rolling element set |
| c Lr | 2400 N/µm | Radial rigidity of rolling element set |
| c kL | 15000 Nm/mrad | Tilting rigidity of rolling element set |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | SIEGMA |
| Model | KM050B-48.96-XX-HB1.00-56C |
| Brand | FYH Bearing |
| Model | KSHA205 14UC |
| Brand | Habasit America |
| Model | C0963S0750LFAA |