We never sell your data to third parties
FAG 1304-K-TVH-C3 self-aligning ball bearing with 20mm bore and 52mm OD. Features a tapered bore, polyamide cage, and C3 internal clearance. Designed to accommodate misalignment and shaft deflections in industrial applications. Precision German engineering from Schaeffler.
MODEL 1304-K-TVH-C3
$67.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Type
Tapered 1:12
Cage Material
Polyamide
Closure Type
Open
Fillet Radius
1 mm
Finish Coating
Uncoated
I.D.
0.787
Internal Clearance
C3
Max Rpm
16000 rpm
O.D.
2.047
Operating Temperature Range
Maximum of +120°C
Overall Width
15 mm
Precision Rating
ABEC 1 (ISO Class Normal), P0
Product Type
Self-Aligning Ball Bearings
Radial Dynamic Load Capacity
12700 N
Radial Static Load Capacity
3300 N
Seal Type
Open
Series
13
Snap Ring Included
Without Snap Ring
Standards Met
DIN 630
Specifications
| Customs tariff number | 8482105060 |
| Manufacturer part number | 0389034900030 |
| 0.355 | |
| Width (in) | 0.591 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
