We never sell your data to third parties
IPTCI SUCNPF205-25MM Insert Only Set Screw mounted ball bearing unit with 25mm bore. Stainless steel insert for corrosion resistance. Standard lip seal. Suitable for OEM installations and custom housings.
MODEL SUCNPF 205 25MM
Contact supplier for technical support on: 704 588 1091
$132.64 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
a
95
Bi
34.0
Bolt Used
3/8
e
70
g
13
l
27
Z
35.7
Nickel Plated 4-Bolt Flange.
- Stainless Steel Set Screw Locking Insert
Available seal options, depending on size:
- B-type seals
- L3 Type (triple-lip) seals available in some sizes
- IP69K seals (dust and waterproof)
Consult IPTCI for speed limitations
- Unit Number: SUCNPF 205
- Bearing No.: SUC 205
- Housing No.: NPF 205
- Weight (lbs.): 1.9
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Toshiba |
| Model | 0302XDSB41B-P |
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read more