We never sell your data to third parties
PTI OWFZ207-35MM is a zinc housing 2-bolt flange bearing unit with a 35mm bore, part of the Silver Series for normal duty applications. It features set screw locking and a non-expansion design. The zinc-plated housing provides corrosion resistance, making it suitable for light to moderate loads in washdown or humid environments.
MODEL OWFZ207-35MM
Contact supplier for technical support on: 704 588 1091
$48.61 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Product dimensional data
- Shaft-Size (d) 35
Dimensions (mm) (in)
- Overall Length (a) 155.5 / 6.1
- Overall Height (b) 37.3 / 1.5
- Thickness Thru Bolt Hole (c) 12 / 0.5
- Overall Width (d) 93 / 3.7
- Bolt Hole Pattern (e) 130.0 / 5.1
- Center of Outer Race to Back of Flange (f) 18.6 / 0.7
- Bolt Hole Diameter (g) 13.5 / 0.5
- Pilot Depth (h) 3 / 0.1
- Length Thru Bore Including Housing (l) 52.0 / 2.0
SKU: 2202300
Ring roll chain tensioner
easy to install, works great, extends chain life by keeping chain from whipping around. Reduces drive chain noise.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
SKU: 2202300
Ring roll chain tensioner
easy to install, works great, extends chain life by keeping chain from whipping around. Reduces drive chain noise.
Read more