We never sell your data to third parties
Dodge 074664 F4B-DL-211-LLS four-bolt flange bearing with 2-11/16" bore (68.263mm), D-Lok concentric clamp collar locking, cast iron housing, standard duty rating, low torque labyrinth seal, non-expansion fixed mount, 214 series ball bearing. 2-11/16" bore 4-Bolt Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL F4B-DL-211-LLS
Contact supplier for technical support on: +1-864-284-5700
$489.53 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
214 series
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.8800 in, 149.352 mm
Bore
2 11/16 in
Bore length
2.6000 in, 66.04 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
2 4/9 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max Speed
3000 rpm
Relubrication
Yes
Seal option
Low torque labyrinth seal
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
2.6875 in
Standoff housing
No
Static load capacity
9838 lbf, 43761.604 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange surface mount
- Bore Diameter: 2-11/16" (68.263mm) exact
- Locking Type: D-Lok concentric clamp collar, single Allen wrench cap screw
- Housing Material: Cast iron
- Duty Rating: Standard duty for normal loads
- Bearing Series: 214 series ball bearing
- Seal Type: Low torque labyrinth seal (non-contact)
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Max Speed: 3000 RPM
- Applications: No shaft marring installation, precise concentricity between bearing and shaft
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#130122
Brand
Dodge
Model
P2B-SC-211-HT
#134283
Brand
Dodge
Model
P2B-DLM-211
#2247196
Brand
Dodge
Model
127330
#791368
Brand
Dodge
Model
P2B-SCMED-211
#2217607
Brand
Dodge
Model
F4B-DL-211-LLS
| Brand | Orbit Industries |
| Model | OP3-I |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/