We never sell your data to third parties
Dodge 075191 F4B-SXRED-115 four-bolt flange bearing with 1-15/16" bore (49.212mm), eccentric collar locking, extreme duty construction. Cast iron housing, 210 series ball bearing, QuadGuard seals with flingers, non-expansion (fixed) design. 1-15/16" bore 4-Bolt Flange Ball Bearing with Eccentric Locking locking used in Dirty & Dusty Environment applications
MODEL F4B-SXRED-115
Contact supplier for technical support on: +1-864-284-5700
$184.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
210 series
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
4.3800 in, 111.252 mm
Bolt to bolt min
4.3800 in, 111.252 mm
Bore
1 15/16 in
Bore length
2.2500 in, 57.15 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Stamped Steel
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
1 3/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
3000 rpm
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.9375 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange (F4B) surface mount configuration
- Bore Diameter: 1-15/16" (49.212mm) shaft size
- Locking Type: Eccentric collar quarter-turn locking system
- Duty Rating: Extreme duty for heavy-load applications
- Housing Material: Cast iron construction
- Bearing Series: 210 series ball bearing
- Seal Type: QuadGuard triple lip seals with flingers
- Expansion Type: Non-expansion (fixed) bearing design
- Max Speed: 3000 RPM operating capability
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#623567
Brand
Dodge
Model
P2B-DLH-115-EHT
#123395
Brand
Dodge
Model
P2B-SCAH-115-FF
#131701
Brand
Dodge
Model
P2B-SC-115
#2217619
Brand
Dodge
Model
F4B-SXRED-115
#123386
Brand
Dodge
Model
P2B-SC-115-NL
| Brand | E-Z Lok |
| Model | EZ-450-8 |
| Brand | Cleveland |
| Model | C91711 |
| Brand | Wiegmann |
| Model | T8848CH |
| Brand | Bridgeport |
| Model | LB-43 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/