We never sell your data to third parties
Dodge 079251 P2B-SXRED-207S Two-Bolt Pillow Block Ball Bearing with 2-7/16" bore, eccentric collar locking mechanism, cast iron housing, standard duty rating, non-expansion (fixed) design, QuadGuard seal protection, 212 series. 2-7/16" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in Dirty & Dusty Environment applications
MODEL P2B-SXRED-207S
Contact supplier for technical support on: +1-864-284-5700
$270.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
212 series
Base to center height
2.7500 in, 69.85 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
7.9400 in, 201.676 mm
Bolt to bolt min
6.8800 in, 174.752 mm
Bore
2 7/16 in
Bore length
2.7400 in, 69.596 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 7/16
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Seal type
Triple-lip contact
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
2.4375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 2-7/16" (61.912mm) with eccentric collar locking
- Bearing Series: 212 series ball bearing with standard duty rating
- Expansion Type: Non-expansion (fixed) design for shaft positioning
- Seal Protection: QuadGuard seals with flingers for enhanced contamination resistance
- Locking Mechanism: Quarter-turn eccentric collar locks in direction of shaft rotation
- Applications: Industrial machinery, conveyors, and general-purpose rotating equipment
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#130121
Brand
Dodge
Model
P2B-SC-207-HT
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#2247194
Brand
Dodge
Model
127328
#2217984
Brand
Dodge
Model
P2B-SXRED-207S
| Brand | Whitney Tool |
| Model | 10415 |
| Brand | Airmaster |
| Model | 20351 |
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/