We never sell your data to third parties
Dodge 079622 P2B-SL-100-LL MODS light duty two-bolt pillow block bearing with 1" bore, 65° setscrew locking, stamped steel housing, and low torque labyrinth seal. 205 series ball bearing insert for general purpose applications. Relubrication capable for extended service life.
MODEL P2B-SL-100-LL MODS
Contact supplier for technical support on: +1-864-284-5700
$106.31 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.1300 in, 28.702 mm
Bearing Series
205 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
3.3800 in, 85.852 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
1 in
Bore Diameter
1"
Bore length
1.0600 in, 26.924 mm
Duty
Standard Duty
Duty Rating
Light duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Stamped Steel
Housing construction
Solid
Housing material
Stamped Steel
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/5
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65 degree setscrew
Lubrication type
Grease
Max Speed
4500 rpm
Relubrication
Yes
Seal option
Low torque labyrinth seal
Seal type
Labyrinth
Seal Type
Low torque labyrinth seal
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.0000 in
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Static Load Rating
1769 lbf
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 079622
- Engineering Number: P2B-SL-100-LL MODS
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 1" (25.4mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: Low torque labyrinth seal
- Weight: 1.2000 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | RAB Lighting |
| Model | A17XFU150 |
| Brand | MRO Supply |
| Model | 50bs12 1 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/