We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 079703 P2B-SCM-300-HTS medium duty set screw pillow block bearing with 3 inch bore, high temperature rating to 400°F, cast iron housing, DualGuard seal, 216 series ball bearing for heavy-duty industrial applications. 3" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCM-300-HTS
Contact supplier for technical support on: +1-864-284-5700
$987.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
216 series
Base to center height
3.5000 in, 88.9 mm
Bearing type
Ball, ball
Bolt Diameter
0.8750 in
Bolt to bolt max
9.5000 in, 241.3 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
3 in
Bore length
2.3800 in, 60.452 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
Yes
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
3 1/5
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
3.0000 in
Standoff housing
No
Suitable for high temperature
Yes
Suitable for washdown
No
Take-up frame size
LD-50,TS-400
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 3 inches (76.2mm), 216 series
- Locking Method: 65° set screw for maximum holding power
- Duty Rating: Medium duty for heavier loads than standard
- Temperature Rating: High temperature to 400°F (204°C)
- Seal System: DualGuard single lip seal with rubberized flinger
- Mounting: Non-expansion (fixed) configuration
- Applications: Heavy-duty industrial machinery, high temperature environments, conveyors, processing equipment
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2218135
Brand
Dodge
Model
P2B-SCM-300-HTS
#2247200
Brand
Dodge
Model
127334
#126948
Brand
Dodge
Model
P2B-VSCB-012
| Brand | Cle-Line |
| Model | C20898 |
| Brand | SpillTech |
| Model | TG3612 |
| Brand | Hubbell Wiring |
| Model | DR20C2GRYTR |
| Brand | Siemens Controls |
| Model | 6ES5376-1AA11 |
| Brand | Champion |
| Model | US12-27/32 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/