We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The McGill CF 1 1/2 SB CR is a 1-1/2 inch roller diameter stainless CAMROL cam follower with standard stud construction and LUBRI-DISC seal. Built from 440C stainless steel with a hex hole drive. Used in cam mechanisms, packaging machinery, and food-grade washdown applications.
MODEL CF 1 1/2 SB CR
Contact supplier for technical support on: 800-626-2120
$173.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Adjustment
None
Clamping Torque (in-lbf)
650
Dynamic Radial Rating
4000
Hex/Slot
Hex Hole
Limiting Speed
2500
Lubrication Fitting Size (in)
0.1875
Material
440C Stainless Steel
Minimum Thread Length (in)
0.75
O.D. Configuration
Cylindrical
Oil Hole Center (in)
0.375
Platform
CAMROL
Rolling Element
Needle Roller - Full Complement
Series
CRES CAMROL
Static Load Rating
4400
Stud Diameter (in)
0.625
Stud Length (in)
1.5
Threads
5/8-18
Tolerance Class
P0 Equivalent
Width
1.68
Regal Beloit Mcgill&Reg; CF 1 1/2 SB CR
UPC: 726166118372 | UNSPSC: 26101708 | GTIN:
Bearings > Cam Follower & Yoke Rollers > Crowned/Flat Follower & Track Runners
McGill® CAMROL® Cam Follower, Cylindrical OD, Series: CF Series, 1-1/2 in Roller Diameter, 7/8 in Roller Width, 5/8 in Stud Diameter, 1-1/2 in Stud Length, 5/8-18 UNC Thread, 3/4 in Thread Length, 4350 lb Dynamic/3560 lb Static Load, 2500 rpm Maximum, -20 to 250 deg F, Standard Stud, Sealed Closure, Hex Head, Chrome Steel Roller, 8620H Steel Stud, Black Oxide
Features:
- Full complement needle roller construction provides high radial load capacity, it also provides improved resistance to shock loading versus caged needle bearing
- It provides improved resistance to shock loading versus caged needle bearing
- A heavy sectioned outer race design to help withstand shock loading of cam follower operation
- Inner studs are induction heat treated in the roller path and flange surfaces
- Our sealed bearing option helps extend bearing life by utilizing a lubrication groove and LUBRI-DISC® seals
- Bearings are supplied pre-lubricated with lithium soap thickened grease
- The annular groove in the outer raceway provides a lubrication reservoir which increases the pre-lubricated life of the bearing
- The threads are manufactured to a class 2 tolerance
- Corrosion resistant
Specs:
- Stud Material: 8620H Steel
- Stud Type: Standard
- Stud Diameter: 5/8 in
- Stud Length: 1-1/2 in
- Roller Material: Chrome Steel
- Roller Width: 7/8 in
- Roller Diameter: 1-1/2 in
- Thread Length: 3/4 in
- Head Type: Hex
- Temperature Rating: -20 to 250 deg F
- Load Capacity: 4350 lb Dynamic/3560 lb Static
- Closure Type: Sealed
- Thread Size: 5/8-18 UNC
- Finish: Black Oxide
- Maximum Speed: 2500 rpm
- Type: Cylindrical OD
- Series: CF Series
Packaging:
- Length: 1.68 in
- Width: 1.68 in
- Height: 2.62 in
- Weight: 0.53 lb
Certifications/Standards:
ABMA Standard
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2490346
Brand
Carter
Model
SC-48-SB
| Brand | Nachi Bearing |
| Model | H-LM501349/14 |
| Brand | Turck |
| Model | BI15-M30-VP6X-H1141 |
| Brand | Koyo Bearing |
| Model | B-1210;PDL125 |
