We never sell your data to third parties
Link-Belt UG226HL 10435631 unmounted ball bearing insert, 1-5/8" bore, set screw locking, C3 clearance, 52100 bearing steel, nylon retainer, steel clearance seal, 2.00" height, 4.00" length, 7370 lbf dynamic load rating, 4590 lbf static load rating, max speed 5330 rpm.
MODEL 10435631
Contact supplier for technical support on: 800-626-2120
$116.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Available seal type
E3 Triple lip seal;N lip seal;H labyrinth seal
Bearing Type
Standard duty ball brg
Bore length (in)
2 1/32 in
Bore size (in)
1.625
C dynamic load rating
7370 lb
Co static load rating
4590 lb
Distance from Bearing Centerline to Centerline of Lube Hole (in)
0.254 in
Distance from Inner Ring Long Hub Face to Centerline of Setscrew (in)
0.32 in
Height
2.00
Inner ring hub diameter (in)
2.281 in
Length
4.00
Lubrication type
EXXON RONEX MP STD
Max Speed
5330 rpm
Max temperature (°F (°C))
225 (107) F (C)
Maximum Temperature (C)
107
Mounted clearance
C3 standard
Outer Ring Width (in)
0.8661 in
Outside diameter (in)
3.3465 in
Primary seal
Steel clearance seal
Retainer type
Nylon
Service instructions
BR3-007 LB 200 ball-300 ball
Setscrew torque (in-lbs)
165-185 in/lbs
Shaft diameter (in)
1 5/8 in
Shaft locking
Setscrew locking
Short Hub Length (in)
0.7969 in
Size code
209
Thread
#5/16-24
Type of seal
Clearance seal
Unit of dimension
in
Vibration frequency fundamental train
0.0065 cps
Vibration frequency inner ring defect
0.0908 cps
Vibration frequency outer ring defect
0.0592 cps
Vibration frequency roller spin
0.0377 cps
Volume
0.524
Volume unit
CDM
Width
4.00
1 5/8" Unmounted Ball Bearing, Standard Duty, Setscrew Locking, Clearance Seal, Spherical OD, Relubricatable
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Gates Rubber |
| Model | QD2/5VS14.09 5VS |
| Brand | JET Tools |
| Model | 140018 |
| Brand | Cleveland |
| Model | C60504 |
| Brand | Red Lion Controls |
| Model | SL-2ES-2ST |
