We never sell your data to third parties
Link-Belt FX3S2M35E (mfg part 10409171) is a 2-bolt flange ball bearing with a 35 mm bore, set screw locking, and a cast iron housing. It features a Buna single lip contact seal, nylon retainer, and C3 clearance. This intermediate-duty mounted ball bearing is fixed (non-expansion) and powder coated for corrosion resistance.
MODEL 10409171
This product has a minimum order quantity of (10 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 800-626-2120
$315.68 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity(10 minimum)
Typically Ships in: 1 day
Returnable: Yes
Ability to Relubricate
Yes
Adjustment slot width (in)
Active in
Adjustment Slot Width (mm)
True mm
Available end cap
No
Bearing Insert Material
52100 Bearing Steel
Bolt hole spacing (width) (in)
5.125
Bolt Size (in)
1/2
Bolt Size (mm)
M12
Bore Shape
Straight
Bore size (mm)
35 mm
Cage Material
Molded fiber glass reinforced nylon
Cage Type
Ball Riding Retainer
Distance from housing cast face to inner ring long hub face (mm)
16.7 mm
Distance from mounting surface to outer most bearing face (mm)
43.7 mm
Duty/Series
Intermediate duty
Fixed vs. Expansion
Fixed
Foot Height (in)
0.56
Grease Fitting Thread Size
1/8 NPT
Height
1.88
Housing coating
Powder coated
Housing Color
Black
Housing construction
One Piece
Housing Length (mm)
155.6 mm
Housing material
Cast iron
Housing style
Flange block
Housing type
Flange, Two Bolt
Inner Ring Outside Diameter (in)
1.847
Insert
SG2M35ELPA
Length
4.75
Length Through Bore (in)
1.563
Locking Type
Set screw
Lubricant
Lithium Complex NLGI 2 Grease
Lubrication type
EXXON RONEX MP STD
Max distance between bolt holes (in)
E Lip Seal;E1 Viton Seal;FF Free Running;HFF Free Running;MHFF Free Running
Maximum Speed (RPM)
4800 rpm
Maximum Temperature (C)
107 C
Maximum Temperature (F)
225 F
Misalignment Capability
±2.0° Misalignment - Static Only
Misalignment Type
Static Only
Mounted clearance
C3 standard
Mounting bolt size (mm)
12 mm
Mounting Housing Width (mm)
14.3 mm
Outer Ring Land Profile
Standard
Pilot Configuration
No Pilot
Primary seal
BUNA single lip contact seal
Radial Dynamic Load Capacity (lb)
5810 lb
Radial Static Load Capacity (lb)
3440 lb
Retainer type
Nylon
Rolling element
Ball Bearing
Seal type
Single lip contact seal
Setscrew torque (in-lbs)
165-185 in/lbs
Size code
207
Unit of dimension
in
Vibration frequency fundamental train
0.0067 cps
Vibration frequency inner ring defect
0.0905 cps
Vibration frequency outer ring defect
0.0595 cps
Vibration frequency roller spin
0.0383 cps
Volume
0.183
Volume unit
GLL
Width
4.75
35 mm Mounted Ball Bearing, Intermediate Duty, Cast Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
